|
|
|
Amp Turn-On
& Turn-Off Pop Eliminators
( some images have larger detailed pictures
- click to enlarge )
|
|
 |
TURN-ON POP DELAY
N-66
$16.5#
Order N-66 .:| Here
|:.
The N-66 was designed to eliminate amplifier
turn-on pops by delaying the turn-on of a pre-amp level
device until the power amp is on. The fixed delay time of
the N-66 is 2.5 seconds. There are only three wires
needed: An input wire, and output wire, and the connection
to the chassis ground. The N-66 can be used for alarm
applications, window roll up or down, interior light
delays, etc.
|
|
|
TURN-ON POP DELAY
N-66A
$24.0#
Order
N-66A
.:| Here
|:.
The N-66A was designed to eliminate amplifier
turn-on pops by delaying the turn-on of a pre-amp level
device until the power amp is on. The delay time of the N-66A
is adjustable between 0 seconds and 30 seconds. There are
only three wires needed: An input wire, and output wire,
and the connection to the chassis ground. The N-66A
can be used for alarm applications, window roll up or
down, interior light delays, etc.
|
|
| |
DELAYED AMP TURN-OFF CIRCUIT
N-68
$25.5#
Order N-68 .:| Here
|:.
The N-68 was designed to keep an amp, crossover or equalizer
on for a few seconds after the deck is turned off. This
will delay any noises associated with the turn-off of the delayed
component.
|
|
| |
AMP TURN-OFF POP ELIMINATOR
N-807
$25.5#
Order N-807 .:| Here
|:.
The
two-channel N-807 was designed to eliminate amplifier
turn-off pop by cutting off the signal to the amps when the
deck is turned off. The N-807 uses a high-quality
mechanical relay to remove the signal when the control voltage
is removed. There are also a red +12 volt lead and a black
ground lead. Female RCAs are used for the inputs and male RCAs
are used for the output's.
|
|
|
|
.:| Back
to the Top |:.
The small print:
All
offers subject to availability
and subject to our normal shipping charge
and sales tax where
appropriate.
OFFER ONLY VALID FOR INTERNET ORDERS.
30% RESTOCKING FEE APPLICABLE
|
|
