Order  N-64 .:| Here |:.

The N-64 stereo head amp is a small booster with 1:10 gain. The inputs and outputs are RCA pigtails and there is one +12 volt (RED) lead and one ground (BLACK) lead for turn-on. The current is less than 10mA so this unit can be connected to +12 volts DC accessory, constant, or ignition. Great for boosting small MP3 players or portable cassette or CD players up to 2.0 volts rms. The N-64 was designed to bring small signals up to the 2.0 volt level common to car audio sources. The signal levels on the left and right channels are user adjustable.  

Order N-645 .:| Here |:.

The N-645 Stereo Line Driver was designed by David Navone, Richard Clark and Paul DeMint for serious competition and demonstration systems. The N-645 features a fully isolated bi-polar power supply, flat bandwidth from 20 Hz up to 25 kHz, infra-sonic filtering on the bottom end, very low source impedance, and soft turn-on/off circuitry.

The power connections are fed into the N-645 via an RJ-11 modular jack and plug. The signal connections into and out of the N-645 are gold-plated female RCA chassis mount jacks. The noise floor, source impedance, and S/N specifications of the N-645 are among the best measurements in car audio components.

The N-645 Line Driver has separate gain adjustments for the Left and Right channels. With a maximum signal level of around 10 Volts rms, this 3.5” x 2.5” x 1” component will boost CD, MP3, DVD, etc. players up to competition quality levels. Also with the very low source impedance of the N-645, it’s possible to lower the noise level in some systems. For instance, with a deck that has an output impedance of 600 Ohms or more, adding a line driver with a low output impedance will “push” the signal through the system less affected by accessory noise. In such applications, it’s important to install the line driver as close to the deck, or other source, as possible. We've had great success targeting systems with OEM decks using LOCs with relatively high output impedances. The N-645 placed just after the LOC can really convert the OEM deck into a competition quality deck.

MVA-01 = 1-TO-4 HQ VIDEO AMPLIFIER 
MVA-01  $29.95

Order MVA-01 .:| Here |:.



MVA-01 = This small mobile or pro video amplifier accepts a single 75 Ohm video input and produces four 75 Ohm video outputs. Each output is 100% controllable and has it's own level control. Both the inputs and outputs are gold-plated RCA Female Chassis Mounted connectors. Electrical connections include +12 Volts DC (Accessory or Ignition or Constant), and Chassis Ground. The + 12 Volts DC is fused at 1 Amp and this circuitry draws very little current (less than 100 mA). The video input accepts signals from 0 up to 2 Volts PP and the output levels range from .5 Volts up to 1.5 Volts PP. Mount screws and instructions are included.

20 X 20 STEREO AMPLIFIERS  
AMP-100 $39.99
Purchase the AMP-100 .:| Here |:.
 

This powerful little 20 x 20 power amplifier was designed for boosting the low  signal outputs of MP3 Players, IPODs, etd. up to speaker level. The internal  electronic filter permits the AMP-100 to boost the highs or the lows or full  range. For spoken word (i.e. XM Satellite Radio and Talk Radio), we suggest  using the internal filter on the FLAT setting. To add bass to a system, slide  the filter to the left for LOW PASS and the output will eliminate the highs. If  only the highs are to be amplified, then slide the filter switch to the right  for the HIGH PASS setting. The LEVEL adjustment on the front should be set for  minimal noise and maximum signal.
The AMP-100 has both speaker level and pre-amp level inputs. When using the pre-amp level inputs, we recommend using Unshielded Twisted Pair signal cabling, such as the  Monster Cable XLN-PRO. Power connections are standard with the fused RED lead connecting directly to the car's +12 Volt DC Constant, the BLACK lead connecting to the car's chassis ground, and the ORANGE lead connecting to either +12 Volt DC Remote output from the deck or to the car's +12 Volt DC Accessory. We're proud of the design of this power amplifier and know that our customers will enjoy the high quality power, added features, and small package."
The AMP-100 specifications are as follows: Richard Clark and Brian Smith finally completed the response tests of the Navone Engineering AMP-100. Check them out here and here Output Power @ 14.4 Volts DC: 20 Watts x 20 Watts (Peak Power: 150 Watts x 150 Watts) THD + Noise: Less than 0.1% S/N: Greater than 90 dB Channel Separation: Greater than 55 dB Frequency Response: 20 Hz to 20 kHz Size: 1.5" x 3.00" x 4.00" Both High Level (Speaker) and Low Level (Pre-Amp) Inputs Green LED Power-On Indicator Gold Plated RCA Input Connectors + 5 Amp Fuse and Holder Variable Input Level Control (External Pot Adjustment): Sensitivity Built-in Active Electronic Filter: High Pass, Flat, Low Pass Modular plugs for power, speaker output, and speaker level inputs All Metal Aluminum Construction + Mounting Hardware & Wiring Instructions This full-featured amplifier can be used for tweeters (High-Pass), mids (Flat), or low frequency (Low Pass).
The AMP-100 has both speaker level and pre-amp level inputs. When using the pre-amp level inputs, we recommend using Unshielded Twisted Pair signal cabling, such as the  Monster Cable XLN-PRO. Power connections are standard with the fused RED lead connecting directly to the car's +12 Volt DC Constant, the BLACK lead connecting to the car's chassis ground, and the ORANGE lead connecting to either +12 Volt DC Remote output from the deck or to the car's +12 Volt DC Accessory. We're proud of the design of this power amplifier and know that our customers will enjoy the high quality power, added features, and small package."

The N-22V is a passive stereo potentiometer designed to control the signal level feeding an amplifier, equalizer, electronic crossover, etc. The N-22V has a stereo pair of RCA inputs and a stereo pair of RCA outputs. It's important that the inputs and outputs be connected correctly. The outputs must feed and amp and the inputs must go to the source (i.e. deck.) That's it. When the black knob is rotated clockwise, the signal increases up to the maximum output of the source. When the knob is rotated counter-clockwise, the signal decreases all the way to zero volts (system mute). The N-22V can be installed under the dash, in a console, glove box, or hidden away.

Order N-806 .:| Here |:.

The N-806 is a pre-amp level (RCA-Leads), voltage sensitive device designed to switch the signal between two head pieces (i.e. Cassette Deck and CD Player or CD Player and MP3 Player) and an amplifier. The control trigger for the switch can be the electric antenna output lead from the deck.  

Order N-1000 .:| Here |:.

This unit features the best possible way to increase and convey the signal level without raising the noise floor.  Featuring a fully isolated bi-polar power supply.  Complete with balanced cables, a transmitter and receiver. It can handle signal levels up to 10 volts RMS and exhibits a source impedance of less than 50 ohms. Soft turn-on and delayed turn-off cir­cuitry makes the N-1000 a truly competition quality component. Used by MARK ELDRIDGE to win the 1995, 1996 & 2000 IASCA Unlimited Expert Class.  Shipped with 12 feet of balanced cable.