Order N-iPhone5V  .:| Here |:.
The Navone Engineering N-iPhone5V charges and operates the new iPhone 3G and 3Gs phones which are 5 Volt. The outputs are Stereo Audio and Video ... and this adapter requires +12 Volts DC and Chassis Ground. That's it.
 
 

Order N-RHL2 .:| Here |:.
The N-RHL2 is our new 2 Channel, 50 Watt per channel , Line Output Converter that will perfectly interface any OEM automotive system to an aftermarket power amplifier, equalizer, electronic crossover, etc. The N-RHL2 uses our "Industry Leading" NE-7V LOC circuitry, and adds the benefits of our N-902 Auto-Trigger circuitry… all in one convenient package. The PINK wire from the N-RHL2 connects to the Remote / Trigger wire of your aftermarket power amplifier so that it will turn on and turn off with the audio system. Let's say that you wanted to add bass to a factory system. Just tap into the car's factory speaker wires with the N-RHL2, and let the PINK wire control your sub woofer's power amplifier. Instructions included.
 

The N-RHL4 is our new 4 Channel, 50 Watt per channel , Line Output Converter
N-RHL4  $39.95

Order N-RHL4 .:| Here |:.
that will perfectly interface to any OEM automotive system to an aftermarket power amplifier, equalizer, electronic crossover, etc. The N-RHL4 uses our "Industry Leading" NE-774V LOC circuitry, and adds the benefits of our N-902 Auto-Trigger circuitry… all in one convenient package. The PINK wire from the N-RHL4 connects to the Remote / Trigger wire of your aftermarket power amplifier so that it will turn on and turn off with the audio system. Instructions included.

Order N-684V .:| Here |:.

The NE-684V is a brand new updated version of our older N-684 and N-684V interface adapters. The NE-684V is a four-channel adapter designed to interface aftermarket decks to factory amps (i.e. Sony speaker level decks to Ford Explorer OEM amps). There is no loss of signal level through the full bandwidth circuitry. The NE-684 is fully transformer isolated with phase and frequency compensation to prevent noise and damage to aftermarket or OEM components. The NE-684 is safe and easy to install and features four floating speaker level inputs and four floating speaker level outputs with Plug and Play wiring.
 
The signal level can be adjusted from a maximum of 9.5 Volts rms down to zero volts. This feature was included for optimizing the S/N of system and is a must for competition or demo systems. The NE-684V is fully transformer isolated with phase and frequency compensation to prevent noise and damage to aftermarket or OEM components. The NE-684V is safe and easy to install. The NE-684V features four floating speaker level inputs and four floating speaker level outputs. To alter the signal level of the NE-684V, simply squeeze the plastic lid on the long sides and lift up on the top. There are four small trim pots inside that are factory pre-set to the maximum signal level. We recommend leaving the level as high as possible for maximum signal and minimal noise.
 
Notice that the NE-684V has color coded wires on Molex plugs on both sides. The larger plug, with spaces for up to 10 wires, is the INPUT side. Connect these wires to the speaker level output of your aftermarket (i.e. Pioneer, Sony, Alpine, JVC, etc.) deck. The smaller plug on the opposite end of the NE-684V is the OUTPUT side. Connect these wires to the factory amplification.

FOUR CHANNEL OEM TO AFTERMARKET STEREO ADAPTER 
NE-774V  $34.95
Purchase the NE-774V .:| Here |:.

	The NE-774V is a competition quality, four-channel OEM to aftermarket stereo adaptor that was designed to connect the speaker level outputs of a factory deck into the pre-amp level inputs of an aftermarket equalizer, electronic crossover, or power amplifier. The signal level of the NE-774V can be adjusted from a maximum of 9.5 Volts rms down to zero volts. The NE-774V replaces our previous N-774V and the main difference is in the Plug and Play wiring and connectors. The circuitry is identical to the 2-channel N-7V and N-777. Notice that the signal level adjustment pots are inside the plastic enclosure. Simply squeeze the lid for access to the adjustment pots. Turning the pots clockwise increases the signal level. We recommend leaving the internal pots at the maximum level unless there is a good reason to decrease the level. The NE-774V features full transformer isolation with a maximum useable signal level, and a smooth frequency response -- which means more signal and less noise. The NE-774V includes compensation for both frequency and phase with no loss of bass or treble. The maximum signal level output of the NE-774V is 9.5 Volts per channel. This is an incredible level and amounts to over 4 times the signal level of a typical aftermarket deck with only 2 Volts of signal. The NE-774V is the best LOC (Line Output Converter) in the world.

The Navone Engineering NE-7V is a stereo, full-range speaker level to pre-amp level line output adapter with balanced and/or common outputs, full transformer isolation, an adjustable output signal level that ranges from zero up to 9.5 Volt Maximum RMS, and a powerful infrasonic filter on the bottom end. The inputs of the device connect to the car's left and right speaker leads that are provided, and the gold-plated RCA female chassis mount outputs feed into the input of an aftermarket equalizer, electronic crossover, or power amplifier. The fully isolated circuitry eliminates DC ground loops and provides excellent coupling with a high input impedance. The source impedance of the Navone Engineering NE-7V is low enough to be considered a competition grade component. The output range adjustment (0 to 9.5 Volts) permits a wide range of OEM decks to perfectly interface with a wide range of aftermarket components. However, we highly recommend leaving the trim pots at the MAX level. To optimize the signal and minimize the system noise, we also recommend using the Autosound 2000 Test Disc CD#104, Level Setting, to perfectly set up your system's gain structure.

Detail of the Input Leads of the NE-7V connecting to the + and - speaker terminals of the factory speaker.   Detail of the input leads of the NE-7V soldered securely to the + and - speaker terminals of the factory speaker. The factory speaker can later be removed from the system, or left in place. Detail of the signal level adjustment on the NE-7V. Factory preset is for Maximum signal. (We highly recommend leaving the trim pots at the Max level.)

The NE-7V's circuitry was designed by David Navone and Richard Clark of Autosound 2000. This high-quality Line Output Converter can be used in high-end competition and demo systems to couple the audio from the OEM factory deck into an aftermarket power amplifier. Adding a sub-woofer to a factory system is a typical recommended use of the  NE-7V. Remember, when the NE-7V is added to a factory system, the stock OEM deck can exhibit output specs as good, if not better, than the most expensive high-end aftermarket decks. The only difference between NE-7V and the NE-8V is in the packaging. The NE-7V comes with input wires. We typically use the striped wire to connect to the + speaker terminal of the factory speaker. After the input wires of the NE-7V are connected to the factory + and - speaker terminals, the factory speaker can be removed, or left in place. Also, if noise is a consideration, we recommend running long speaker leads from the + and - speaker terminals and locating the NE-7V very close to the input of the aftermarket power amplifier.

The N-7785V is a four channel device that features two channels of full range output, plus two channels of low pass out with the same bass boost as the N-85 and N-85V. The signal level can be adjusted from a maximum of 9.5 volts rms down to zero volts. This is a great feature for optimizing the S/N of system and a must for competition or demo systems. Turning the knobs clockwise increases the signal level. At the amplifier/speaker we recommend a 1:3 gain structure for most systems. The N-7785V is a great device to connect an OEM deck into TWO aftermarket amplifiers. The front amps can be fed a full-range signal and the rear channels can be low-pass only.

Order N-686 .:| Here |:.

The N-686 is a two-channel adapter designed to interface aftermarket decks to factory amps (i.e. Sony speaker level decks to Ford Explorer OEM amps).  There is no loss of signal level through the full bandwidth circuitry. The N-686 is fully transformer isolated with phase and frequency compensation to prevent noise and damage to aftermarket or OEM components. The N-686 is safe and easy to install. The N-686 features two speaker level inputs and two speaker level outputs.

Order N-FGA-HD  .:| Here |:.

The two-channel N-FGA-HD is the perfect device for converting high-powered floating ground components to normal three-wire configuration. The N-FGA-HD can also be used for stereo displays where many different outputs need to be common grounded. The power handling for the N-FGA-HD is 50 watts per channel.

Order N-62-HQ .:| Here |:.

The N-62 is a two-channel high quality floating ground adapter that features full transformer isolation. The N-62 can be used to convert high-power or floating ground components to normal three-wire configuration or four-wire configurations.

Order N-KEN-AUX .:| Here |:.

Introducing the new Navone Engineering N-KEN-AUX gold plated Auxiliary to Stereo RCA input adapter for Kenwood aftermarket decks. Fits all 13-Pin DIN Auxiliary jacks on Kenwood head units. See detail in photos. This new cable provides a high quality stereo audio input. 

A

Order N-PIO-AUX .:| Here |:.

Introducing the new Navone Engineering N-PIO-AUX gold plated Auxiliary to Stereo RCA input adapter for Pioneer aftermarket decks. Fits all 12-Pin square auxiliary jacks on Pioneer head units. See detail in photos. This new cable provides a high quality stereo audio input.

Order N-ALP-AI-AUX .:| Here |:.

Introducing the new Navone Engineering N-ALP-AI-AUX gold plated Auxiliary to Stereo RCA input adapter for Alpine AI-Net aftermarket decks. Fits all slotted round auxiliary jacks on Alpine Ai-Net head units. See detail in photos. This new cable provides a high quality stereo audio input. 

Order N-ALP-M-AUX .:| Here |:.

Introducing the new Navone Engineering N-ALP-M-AUX gold plated Auxiliary to Stereo RCA input adapter for Alpine M-Buss aftermarket decks. Fits all 8-Pin DIN Auxiliary jacks on Alpine M-Buss head units. See detail in photos. This new cable provides a high quality stereo audio input.