TOROIDAL ALTERNATOR NOISE FILTER – 30 AMP
Order N-25 .:|
"Dodge Ram Cummings Torque Converter
Clutch Cycling Repair.
Learn more here
The N-25 passive alternator noise filter was designed to
eliminate in-line noise in auto sound systems. Applications
include AM/FM cassette decks, compact disc players,
equalizers and amplifiers, cellular phones, CB radios, etc.
This super filter uses a specially wound toroid filter for
minimal losses and maximum effectiveness.
HOT SALE ITEM!!
12 VOLT DC @ 2 AMP ISOLATED POWER SUPPLY
Reduced from $165.0. You save $40.05!!
Order N-IP12A2 .:|
The N-IP12A2 Isolated Power Supply is a great product for
noisy MP3 players -- including iPods. Only four wires
needed. You feed it +12 Volts and chassis ground, and the
N-IP12A2 supplies a super clean +12 Volts and ground for
your accessories. The ultimate "noise filter."
The N-IP12A2 Isolated Power Supply supplies a regulated
13.8 Volts DC at 2 Amps from an input voltage of 9 to 16
Volts DC. The main feature of the N-IP12A2 is that output
voltage is NOT connected to the input voltage. This means
that as long as the load does not touch the car’s
chassis, the N-IP12A2 will supply a new ground reference
that is clean, regulated, and free of the car’s
Uses for the N-IP12A2 include powering non-powered
processors such as equalizers, electronics crossovers,
DSPs, etc. There is a 3-Amp fuse on the + Input Lead.
The best test to see if a system would benefit from an
isolated power supply is to temporarily power the
component with a small 12 Volt DC motorcycle battery. If
the noise goes away and the component performance improves
with the motorcycle battery, then the isolated supply
should be considered. An isolated power supply is not an
in-line filter. The supply actually generates its own
energy and when installed correctly, acts like a small
motorcycle battery that never needs to be charged.
Need more power? Checkout the .:|
Checkout this amazing addition to the ZDDP Line
The N-RHL4 is our new 4 Channel, 50 Watt per channel,
Line Output Converter that will perfectly interface any
OEM automotive system to an aftermarket power amplifier,
equalizer, electronic crossover, etc. The N-RHL4 uses
our "Industry Leading" NE-774V LOC circuitry, and adds
the benefits of our N-902 Auto-Trigger circuitry… all in
one convenient package. The PINK wire from the N-RHL4
connects to the Remote / Trigger wire of your
aftermarket power amplifier so that it will turn on and
turn off with the audio system. Instructions included.
The N-RHL4 is introductory priced at only $39.95.
!! NEW - Vintage
Checkout the Coherer
Spark Gap Radio. Its part of a new line of replica
electronics of equipment dating back to 1896. Yeah, that's over 100 years ago.
Check it out here!!!!